While it’s the combination of colors that make each piece special, we will try to break down each color and talk about some of its individual characteristics. We love the concept that the couple is kicking off the creative process of making the final glasswork. The action of combining the colors is the first step in the artistic process and it takes place on a day to remember.
As mentioned in our Gallery of Color article, we particularly like at least three colors; two main colors and a third highlight color. Each order is hand packed, so we can easily adjust volumes up and down, within the total amount of color glass crystals we send to our clients. Glasswork containing up to 7-8 colors can be very nice too, with a general rule of thumb, to avoid the super dark colors like deep blue, jet black, and gemstone ruby. Of course, if you do want one of these colors, reducing the volume of it substantially compared to the other colors is wise. Not sure how to do that? Just tell us in the comment section on the order form “comments or details about color”, “reduce the jet black substantially” or “jet black at 5%”, or something similar. Don’t be shy about making tweaks in color volumes. This is how you can further customize and make the final glasswork, uniquely yours.
We will talk about “major colors” and “highlight colors” in this article. What we mean by a major color, is one where we send more volume of that color, vs a highlight color, which will be sent in a smaller volume. For example, Pure White can be a major color when you request and we send a larger volume of it compared to the other colors. It can be a highlight, if you request we send a small portion of it, meaning less white, and in general, more volume of the other colors.
One more thing—there is very little blending of the colors in the final glasswork. If you want purple, don’t select red and blue and then expect purple. Just go ahead and order the purple. Our Aria Series Vase may be most prone to some blending. It gets two coats of color when we are making it.
The following list is long. Perhaps jot down which colors you think you might like first, and then focus on our comments about those specific colors below. Stop. Write down your list. Got it? Ok. Proceed.
- Red. Our red is a fantastic transparent, medium toned red. Possibly a little bit on the orange side of red, but definitely a nice red. It’s great as a major color in the glasswork. It’s not a great “highlight” color as it can sometimes get washed out in small volumes. I’m personally not a huge fan of both Red and Deep Blue, being major colors in the final glasswork. If they’re a couple, our of 5-8 colors, that’s ok. Just red and deep blue alone are a difficult mix to get just right. The red crystals appear a bit “orangey” but they do shift to a more true red upon heating.
- Sky Blue. This is a gorgeous, light and highly transparent blue. It’s delicate and light transmission through it is beautiful.
- Citron Green. Our citron is a lemon/lime color, with a hefty dose of lemon in it. Do expect to see some yellow coming from it in the final glasswork. If you want a truer green, do consider our emerald green.
- Emerald green. Not too light. Not too dark. It’s a perfect balance of a true green. The crystals themselves are gorgeous and reminiscent of raw uncut green emeralds. A customer flying from the Caribbean was questioned closely to see if she was smuggling emeralds. We take that as a compliment. They are gorgeous. With the emerald itself, we use a proprietary blend of 2 emerald colors. This mix is unique to us.
- Deep Blue. It’s a gorgeous cobalt blue. It can be rather bossy in the final glasswork, we prefer the ability to adjust its volume, compared to the other colors. Equal amounts, in crystal form of deep blue, say, compared with sky blue, would end up with a sculpture or vase that looks mostly deep blue. We often send much less of the deep blue, compared to the other colors to help balance this out in the final glasswork. If you like a nice cobalt blue, this is the color for you, for sure. It works well as a highlight color too—perhaps 5% or even less.
- Aquamarine. This is a fantastic blue. Not too light. Not too dark. Very medium toned and gem-like. One of my favorites, for sure. The aqua though, when used with yellow, will create a small fringe of olive green/grey where the 2 colors meet. It’s specifically a chemical reaction between the two and is unique to the two. I personally really like it, but if you do have these as two of your colors, do expect some olive/grey to appear. For a couple with “chemistry”, this may be perfect.
- Yellow. Following up with the Aqua, the yellow is a reactive color that will make an olive grey fringe of color where the yellow and aqua crystals touch in the final glasswork. The yellow is super bright and pretty, but it does have a slight murkiness to it. It’s extremely slight though. If you love yellow, don’t hesitate to use it.
- Orange! Who knew I would become such a huge fan of orange. It’s beautifully transparent and super bright. It works well as a major color, and it’s a true delight as a highlight color. If you want that little pop of color in your piece, consider orange as a highlight. I think I’d be very happy with a final glass piece made totally of orange.
- Pure White. In crystal format, the pure white is absolutely gorgeous. In the final glasswork it’s translucent, possessing both characteristics of a transparent and an opaque. This works great as a major color, but it’s usually used as a highlight color.
- Ivory. It’s classic and gorgeous. Couples often use ivory highlights in their mixture as a reminder/link to a classic ivory wedding gown. It’s beautiful. The crystals are a bit “darker” of an ivory, that you’ll see in the final glasswork. In the glasswork, it loses a bit of its yellow tone and transforms to a beautiful off white.
- Amethyst Purple. Absolutely perfect if you’re a purple fan. Highly transparent and gem-like. This is one of my favorites. They crystals themselves have a slight bluing tone to them, but transform into a gorgeous purple in the final glasswork.
- Tuxedo Grey. It’s gorgeous and masculine. Highly transparent and just a beautiful medium grey in the final glasswork. The crystals themselves look like a dark charcoal, but they mellow out in the heat (2100 degrees!) of the glass becoming a very medium toned grey.
- Jet Black. A classic. Super sleek in the glass. Masculine and refined. A little jet black though goes a LONG ways. We’ve had some couples express to us that it didn’t meet their expectations when used along with other colors in equal amounts. For example, equal amounts of jet black, aquamarine, emerald green, and sky blue—all together in the mix and equal, will result in a sculpture or vase that is mostly black. I love the black as a major color with white, ivory, and grey. Consider using volumes of 5-10% only, of the black, if you want it in the mix with brighter more colorful tones.
- Brilliant Pink. Love this color too! The crystals are pink, but they really intensify to a medium bright highlight transparent pink in the final glasswork. Very medium intensity. Not too light. Not too dark. Not too bright. Not too pale.
- Deep Teal. Thinking about a peacock color themed wedding? Well, we must have some deep teal in the mix. Not too dark, yet a beautiful blue green color. I think it’s probably one of our most overlooked colors, yet one of our prettiest.
- Gemstone Ruby. This is a very dark and deep cabernet red. It has some characteristics of black in it, with a beautifully deep red tone. It’s not terribly transparent. It’s a great “highlight” volume, sometimes used along with our standard red as a major color, yet we’ve also seen it also work remarkably well as a major color when specifically mixed along with tuxedo grey, ivory, and just a slight touch of jet black.
Not seeing the color you’re looking for? We do keep a stash of other colors in our ‘secret box’. Just send us a request and describe what you’re looking for. We will do our very best to find a color or combination that works just right for you.
Remember to read our article “Gallery of Color” to see more examples and combinations that are used in the final glass work.
How to order “major” and “highlight” volumes? In the comment box “comments or details about color” you can say things like “all colors in equal amounts, with just a touch of the jet black” or “Emerald 20%, Sky Blue 20%, Deep Blue 20%, and the rest Pure White”. Don’t worry about getting too specific or perfect. The artist reviews each color combination prior to shipping and will offer suggestions if needed.
We’d really LOVE your feedback on this article. Did it make color selection more confusing? Did it add clarity? Was it worth the read? How did it affect your color choices? We want to make the process of picking colors very easy, with more importantly, we want the final glasswork to be exactly what you had in mind when making the initial selection.
So now it's time to pick out the glass color crystals that you will combine during your wedding. This can seem like a daunting task at first, but overall, we think our couples have done an absolutely remarkable job!
Each order is hand packed by us and reviewed by the artist. Each couple gets the same amount of glass color crystals (about a pound), and within this amount we can send equal amounts of each color, or have a little fun and increase and decrease certain colors to get major colors and highlight colors.
Imagine you're doing a blended family unity ceremony. The couple could have major colors, while the kids are "highlights". We'd send more of the main colors, and less of the highlight colors. (The order form has a comment box "comments or details about color." Here you can relay information to us like this.)
Each color combination is reviewed personally by the artist prior to shipping for your wedding. The artist may suggest increasing or decreasing certain colors in your combination to yield the best effect. For example, if the couple selects Deep Blue, Sky Blue, and White, the artist may suggest that the ratio of each color be adjusted. We will automatically adjust and send more Sky Blue and White, while decreasing the amount of the Deep Blue. The artist knows that the Deep Blue is super rich and gorgeous, and that using a bit less of it compared to the other colors selected will help balance the colors in the final glass artwork. We always keep an eye out for you behind the scenes. Sometime, you may even get a quick phone call or an email from the artist to chat about your selection if we see an issue.
If you do have any questions, please feel free to contact us through our website, or by phone. We're happy to help.
Some of the common questions we get are:
1. How many colors should we select? (We like at least three. Two major colors along with a third highlight color. Just two is ok too)
2. What if we want 7-8 colors? That's very possible and can be beautiful. We do recommend staying away from the super dark colors-- deep blue and jet black with this many. If you do want these dark colors, and 7-8 colors total, we'll probably increase the amount of all colors, and reduce the amounts of the dark colors.
From the chats that we've had with couples, we'd estimate that about 80% of our clients use colors from their wedding. The remainder may use birthstone, favorite colors, or even colors symbolic for the location of the wedding. (Nautical blues and a splash of white for a beach side wedding!) Orange, Red, Yellow, Citron Green, Emerald for a Fall wedding! Have fun with the combinations!
Below are a few combination that have caught our eye. Perhaps these will give you a better feel for how the different colors will look together. On the order form, there is a box "comments or details" about color. Here you can say things like "A BUNCH of Aqua and Orange, and just a little white" or call our the percentages that you'd like to see in the final glass work. Things may not turn out exactly, but we will be fairly close. It's art, and it's fun and beatiful!